This conversion kit is designed to fit a standard GW Nemesis Dreadknight model kit. It isNOT a full model, just parts to add to your model kit to convert it into a Arch Battleknight to eliminate the Baby-Carrier look of the standard kit. This kit will require some modeling skills to construct, but to make it easier Im including this instructional video CLICK HERE.
NOTE:This kit is Licensed, for a limited time, to Pop Goes the Monkey from the digital artist,Antonis Bouras. If you would like to purchase this .stl file or see what he’s working on next[click here].
Monkey Resin 3 is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.
These parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.
*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.
Check out these similar items
This conversion kit is designed to fit a standard GW Nemesis Dreadknight model kit. It isNOT a full model, just parts to add to your model kit to convert it into a Arch Battleknight to eliminate the Baby-Carrier look of the standard kit. This kit will require some modeling skills to construct, but to make it easier Im including this instructional video CLICK HERE.
NOTE:This kit is Licensed, for a limited time, to Pop Goes the Monkey from the digital artist,Antonis Bouras. If you would like to purchase this .stl file or see what he’s working on next[click here].
Monkey Resin 3 is a high-quality, UV-cured resin designed for strength, impact resistance, and precise detail reproduction. Its low shrinkage rate prevents distortion or loss of fine features while providing a refined surface with stunning details.
These parts will arrive attached to their support structure, ensuring all components remain secure during transportation. Most parts can be easily removed by hand; however, if you soak them in hot tap water for 5 minutes, they will come off much easier. Some attachments may require snippers or a hobby knife for a cleaner detachment. Please make sure you use sharp tools carefully to avoid injury. Once removed, all products are pre-cleaned and ready for primer and paint. Use only super glue to adhere these parts to your models.
*NOTE: Pop Goes the Monkey is not affiliated with Games Workshop Group PLC or its affiliates. This product is not designed, manufactured, licensed or approved by Games Workshop Group PLC, and is not intended to include or infringe any intellectual property rights of Games Workshop Group PLC. Please see our full Terms of Service for more information.
There are no reviews yet.
Check out these similar items
English
There are no reviews yet.